Telure Standard 2026.1
The Telure Standard for a dance studio
A versioned, Telure-curated program of checks for a dance studio, written in Telure’s own words and organized by how the facility actually runs: the daily rhythm first, then the recurring program above it. It is a documented reference the facility measures its own work against and records reasons against, not a certification. The basis register below shows what informs it, and at what depth.
Alignment tracker
Inside Telure, this list is an alignment tracker a facility turns on with a checkbox. The recurring program below is its clause list, informed by the manufacturer's manual and general safety practice, because no consensus operational standard exists for this facility type. The facility matches its own tasks, checklist items and training items to the clauses they cover, marks the clauses that do not apply with a written reason, and its exports state what share of the rest has a check behind it.
This tracker is Telure's own clause list, informed by the organization's published document. It does not replace reading that document yourself and verifying your facility against it, and marking a clause here is a note on your own record, not a statement by that organization. Where equipment is involved, the manufacturer's documentation governs.
The daily rhythm
Opening walk
Walked before the doors open, item by item, each answer attributed to the person who gave it. The starting set for a dance studio:
- Marley flat and clean: no lifted seams, tears, or curling tape edges
- Floor swept and dry: no slick spots; rosin contained to the box
- Barres secure at every bracket: no wobble or shift under load
- Mirror panels intact: no chips, cracks, or loose edges
- Speaker and sound cables routed off the dance surface
- Walkways, doorways, and exits clear
- Observation area tidy; bags and street shoes in cubbies
- Water station stocked; spills wiped immediately
- First aid kit stocked; ice packs on hand
- Ventilation and temperature set for class load
During hours
Anything flagged during the day opens a corrective entry on the spot: the item, the finding, and who saw it. Taking equipment or an area out of service is a recorded event with a name attached, and so is returning it. Nothing waits for the end of the shift to become a record.
Closing check
The end-of-day counterpart every facility runs: securing the space and making sure nothing the day surfaced dies overnight.
- Activity areas clear: no members left inside
- Hazards cleared from floors and landing surfaces
- Equipment secured, stowed, or powered down per procedure
- Today's flagged items have maintenance entries opened
- First aid and rescue equipment restocked if used today
- Exits clear; doors, gates and access points secured
The recurring program
The work above the daily walk. Each task surfaces on the day it is due and escalates as it goes overdue. Where a check addresses a published designation, the citation chip names it; a chip is a reference, never a compliance claim.
Weekly
Marley seam & tear walk
Walk every marley surface end to end: seams flat and taped, no lifted edges or curling corners, every tear taped with its location recorded against the roll set. Part of the Telure Standard: the manufacturer's manual governs all equipment intervals.
Barre mount & bracket check
Load-test every wall barre at each bracket: no shift, no wobble, anchor screws tight. Any bracket that moves gets flagged and the barre taken out of use. Part of the Telure Standard: the manufacturer's manual governs all equipment intervals.
Sprung floor response walk
Walk each studio floor on a grid: even response underfoot, no dead spots, soft panels, or hollow corners. Record the location of any change so the series shows progression. Part of the Telure Standard: the manufacturer's manual governs all equipment intervals.
Monthly
Mirror mount & panel inspection
Check every mirror panel: mounts and clips tight, edges flush with trim, no chips or cracks. Chips at the base near the barre line get a photo on the flag. Part of the Telure Standard: the manufacturer's manual governs all equipment intervals.
Portable equipment & prop check
Portable barres, mats, and class props: feet and fittings tight, no cracked uprights or split mat seams; retire anything questionable. Part of the Telure Standard: the manufacturer's manual governs all equipment intervals.
Quarterly
Emergency plan & exit review
Walk the emergency plan with staff on shift: exits clear, evacuation routes posted, and the incident documentation flow known to every instructor. Part of the Telure Standard: the manufacturer's manual governs all equipment intervals.
Yearly
Floor system inspection (qualified person)
Full inspection of sprung floors, subfloor, and marley condition by a qualified person; file the report against this task. Part of the Telure Standard: the manufacturer's manual governs all equipment intervals.
The basis register
What informs this pack, at what reference depth, and when each entry was last checked against its source. An entry here means the pack is informed by the document named; it never means the pack, or any facility using it, is certified to or compliant with it.
| Source | Tier | Jurisdiction | Access | Verified |
|---|---|---|---|---|
| OSH Act General Duty Clause, section 5(a)(1) (29 U.S.C. 654(a)(1))US Congress / US Department of LaborEmployers must keep the workplace free of recognized hazards likely to cause death or serious physical harm to employees. Public domain. | Tier 1Public law | US | Free to read | Checked 2026-08-31 |
| 29 CFR Part 1910US Occupational Safety and Health AdministrationOSHA general industry regulations for employee safety. OSHA has stated that general-industry standards govern employees at amusement and water facilities, while patron safety is regulated at the state level. Public domain. | Tier 1Public law | US | Free to read | Checked 2026-08-31 |
| Manufacturer documentation for installed equipmentOperator-supplied manuals, bulletins and service documents. Where any pack cadence differs from a manufacturer's documented interval, the manufacturer's interval governs. | Tier 5Manufacturer documentation | n/a | Operator-supplied | Not independently verified |
No consensus operational standard currently exists for dance studio operations. The entries above ground specific slices of the program (workplace safety for staff, sport rules, published guidance); the rest of the pack is Telure's own curated practice, and is stated as such.
The manufacturer’s documentation governs
Where a manufacturer's documentation sets an inspection type or an interval for a piece of equipment, that documentation governs. The pack's cadences are a program to build on, not a replacement: when the two differ, Telure shows the difference so it can be seen and documented, and the recorded schedule follows the manufacturer.
Where Telure stands
The Telure Standard is Telure's own curated program. Telure is not affiliated with, endorsed by, or licensed by any standards body or association named here, and adopting the Telure Standard does not make a facility compliant with, approved under, or certified to any standard. Where equipment is involved, the manufacturer's documentation governs inspection types and intervals.